- 1 034
- 3 533 240
Toms Trains and Things
United States
Приєднався 25 чер 2016
Model Railroading through my eyes from start to finish I enjoy sharing my knowledge with all of you so you can feel better about making your hobby enjoyable for yourself. Thanks for being a part of my experience
SUPPORT THIS CHANNEL
Locals: trainofthought.locals.com/
PayPal : paypal.me/tomstrainsandthings
Amazon Link: Amazon Link:www.amazon.com/shop/tomstrainsandthings
You may have seen all the instructional videos out there but here is a look at how I see the hobby and my methods that I developed through the years. I spent a lot of time making mistakes before there were instructional videos and the only way to see anything about the hobby was to watch it on TV on PBS or buy it on VHS. So Subscribe to this channel to see the upcoming videos I have to offer and I guarantee you will come out with a better understanding of how things are done.
SUPPORT THIS CHANNEL
Locals: trainofthought.locals.com/
PayPal : paypal.me/tomstrainsandthings
Amazon Link: Amazon Link:www.amazon.com/shop/tomstrainsandthings
You may have seen all the instructional videos out there but here is a look at how I see the hobby and my methods that I developed through the years. I spent a lot of time making mistakes before there were instructional videos and the only way to see anything about the hobby was to watch it on TV on PBS or buy it on VHS. So Subscribe to this channel to see the upcoming videos I have to offer and I guarantee you will come out with a better understanding of how things are done.
Clean Workbench - Now What Should I Do Next
Finished up the last project and just cleaned off the workbench for the next project. The big question is; what should I do next. I have many plastic and Hydrocal kits which I don't feel like doing right now. That brings down the choice to Bar Mills Kits
Let me know in the comments and tomorrow night on WorkBench Wednesday before I start on the kit
S U P P O R T THIS C H A N N E L
LOCALS: trainofthought.locals.com
Rumble: rumble.com/c/TomKvichak
Amazon Link:www.amazon.com/shop/tomstrainsandthings
PayPal : paypal.me/tomstrainsandthings
Membership:
ua-cam.com/channels/E1TsLOIG2wxBZ7fe8512qw.htmljoin
Music on all videos from Epidemic Sound. Get One Month Free when you subscribe through this link. Here is a short playlist
share.epidemicsound.com/qj6qaj/?playlist=go4t525tjcjz70gskderneuviw4qdu6a
CONTACT INFORMATION:
workbenchwednesday@gmail.com
tomstrainsandthings@gmail.com
tomstrainofthought.com/
#tomstrainofthought
#structurekits
#floridatrainshows
Disclaimers: all opinions are my own, sponsors are acknowledge.
Intended for viewers over the age of 14
Let me know in the comments and tomorrow night on WorkBench Wednesday before I start on the kit
S U P P O R T THIS C H A N N E L
LOCALS: trainofthought.locals.com
Rumble: rumble.com/c/TomKvichak
Amazon Link:www.amazon.com/shop/tomstrainsandthings
PayPal : paypal.me/tomstrainsandthings
Membership:
ua-cam.com/channels/E1TsLOIG2wxBZ7fe8512qw.htmljoin
Music on all videos from Epidemic Sound. Get One Month Free when you subscribe through this link. Here is a short playlist
share.epidemicsound.com/qj6qaj/?playlist=go4t525tjcjz70gskderneuviw4qdu6a
CONTACT INFORMATION:
workbenchwednesday@gmail.com
tomstrainsandthings@gmail.com
tomstrainofthought.com/
#tomstrainofthought
#structurekits
#floridatrainshows
Disclaimers: all opinions are my own, sponsors are acknowledge.
Intended for viewers over the age of 14
Переглядів: 377
Відео
Pine Creek Paint Co Final Assembly
Переглядів 58714 годин тому
The final touches to the Pine Creek Paint and Coating Co Project are in this video. This kit only took about 10 days to complete. It was a fun kit with a lot of different materials included in ther package rumble.com/v5cvwth-live-from-the-work-bench.html?mref=3pk0r&mc=ek8vg S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazon....
Midway Through Pine Creek Paint Co
Переглядів 516День тому
Here is an update on my latest project, Pine Creek Paint and Coating Co., a Micro-Scale Models Inc kit, which I started a week ago I will have more on the Workbench Wednesday Live Stream where I will talk about how I would do things different on kits from this manufacturer S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazon.c...
Keep Up To Date With The Progress Of Pine Creek Paint Co
Переглядів 354День тому
My newest kit that I unboxed on the Workbench Wednesday Live Stream on August 21 is Pine Creek Paint Co from Micro-Scale Models. This is the first kit I will be doing form this manufacturer, and I'm excited about getting started on it. Keep up to date with videos and live streams on this channel S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak A...
The Shack Pack - A Simple Kit By Bar Mills Scale Model Works
Переглядів 50014 днів тому
This Bar Mills Scale Model Works kit is a classic which I picked up at a train show recently. Watch as I build this kit, additional tips and tricks can be found on my Workbench Wednesday Live Streams at 8PM on Rumble & UA-cam S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazon.com/shop/tomstrainsandthings PayPal : paypal.me/t...
Greenbrier J3a on Howard Zane's The Piermont Division
Переглядів 80814 днів тому
Here is a video of Al Pugliese running the J3a on Howard Zanes The Piermont Division along with some photos of the scenery along the way S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazon.com/shop/tomstrainsandthings PayPal : paypal.me/tomstrainsandthings Membership: ua-cam.com/channels/E1TsLOIG2wxBZ7fe8512qw.htmljoin Music ...
Easily Apply Dry Transfer Decals To Buildings On Your Model Railroad
Переглядів 79814 днів тому
My current project "The Shack Pack" one f Bar Mills original kits from long ago had a drey transfer decal in it. I thought I would get oul all my old Dry Transfers from Woodland Scenic and popuate the other walls with these dry transfer signs. Here are the resultsof my effort S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazo...
Magnificent HO Scale Model Railroad In Bethlehem Pennsylvania
Переглядів 2,8 тис.14 днів тому
We visited The Lehigh & Keystone Valley Museum in Bethlehem Pennsylvania on May 19 2024 as part of the UA-cam Modelrailroaders Meet & Greet Here is 20 minutes of non stop train action from when we were there S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazon.com/shop/tomstrainsandthings PayPal : paypal.me/tomstrainsandthings...
Hidden Gem Of A Layout In Barn At Velousia County Fair Grounds
Переглядів 14 тис.21 день тому
This is the HO Scale layout that is only available to the public during train shows and the county fair Only about 200 yard away from the Tommy lawrence Arena where the train show is held S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazon.com/shop/tomstrainsandthings PayPal : paypal.me/tomstrainsandthings Membership: ua-cam....
Deland Train Show July 13 2024
Переглядів 2,3 тис.21 день тому
Here are the video clips from the Deland train Show on July 13 2024 A little late but finally here S U P P O R T THIS C H A N N E L LOCALS: trainofthought.locals.com Rumble: rumble.com/c/TomKvichak Amazon Link:www.amazon.com/shop/tomstrainsandthings PayPal : paypal.me/tomstrainsandthings Membership: ua-cam.com/channels/E1TsLOIG2wxBZ7fe8512qw.htmljoin Music on all videos from Epidemic Sound. Get...
Best Soldering Helping Hands Third Hand By Noevsbig
Переглядів 93728 днів тому
Best Soldering Helping Hands Third Hand By Noevsbig
Howard Zane Part 2 - First Look At The Piermont Division
Переглядів 931Місяць тому
Howard Zane Part 2 - First Look At The Piermont Division
Oakleaf Shipping & Storage - My Latest Build
Переглядів 592Місяць тому
Oakleaf Shipping & Storage - My Latest Build
Coal Breaker Excursion May 18 2024 Meet & Greet
Переглядів 3332 місяці тому
Coal Breaker Excursion May 18 2024 Meet & Greet
Building Prater Paint Strat To Finish
Переглядів 4952 місяці тому
Building Prater Paint Strat To Finish
Tallahassee Train Show June 22 2024 Part 1
Переглядів 9032 місяці тому
Tallahassee Train Show June 22 2024 Part 1
Bar Mills Over-Nighter's Details - Give Away To Come
Переглядів 4402 місяці тому
Bar Mills Over-Nighter's Details - Give Away To Come
A Brief Bar Mills Scale Model Works Tour
Переглядів 1,2 тис.2 місяці тому
A Brief Bar Mills Scale Model Works Tour
Back In The Train Room June 2024 - Another Give Away
Переглядів 6712 місяці тому
Back In The Train Room June 2024 - Another Give Away
A Preview Of Things To Come In Future Videos
Переглядів 6342 місяці тому
A Preview Of Things To Come In Future Videos
Train Room Update Before Meet & Greet Vacation
Переглядів 6843 місяці тому
Train Room Update Before Meet & Greet Vacation
Tips On Building American Seltzer Company - Limited Edition Kit By Bar Mills
Переглядів 6894 місяці тому
Tips On Building American Seltzer Company - Limited Edition Kit By Bar Mills
Easily Scratch Build Wooden Grade Crossings For Your Model Railroad
Переглядів 9144 місяці тому
Easily Scratch Build Wooden Grade Crossings For Your Model Railroad
Easiest And Quickest Way To Ballast Your Model Railroad Track
Переглядів 2,1 тис.4 місяці тому
Easiest And Quickest Way To Ballast Your Model Railroad Track
I think you should build Clarks Wood Products.
Thanks Ray
good see you work on kits and thanks for the share on channel nice bench set up nice kit you got i like to build kit my selfe i build metscalfe kit tom build the cigar corner will nice kit see get built on channel thanks four the share thanks lee
Cool, thanks Lee
Hey Tom Have a cigar! For Your cardiologist and build Cigar Corner!😂
Thanks Al. So far it looks like the majority of voters are going with the Ciger Corner kit
DPM Gold kit or Cigar Corner, can’t have a neat work bench 😅. Let me know when you think your ready to do a Sierra West saw mill kit, LOL.
Thanks Ken, SW kit is a little out of my price range right now
Can't have a clean workbench very long, Tom. Lol,Ha Ha! I like the wood products kit,also.
You got that right! It won't stay clean for long
Tom whatever kit works for you. Cigar Corner seems most interesting and complex. I would vote for Cigar Corner.
Thanks Steve. That's the better choice
Cigar corner. Still trying to figure out “ taking off” for Labor Day?
Thanks Steve, hade to relax and have some hot dogs
I learned many years ago when I worked as a receptionist to always keep my desk covered in papers, books, etc. That way whenever someone came to ask me something they thought I was very busy and they didn't stay long. Most of the time the stuff on my desk was just for show. 😜
Don't worry, it will get messy very fast once I start the new project. had to make room for more clutter
I would do Clarks
Thanks Gary, everyone said the same so far
Tom, I’ve never put together or stained or painted a Hydrocal kit. If you’re up to it I’d like to see how to do that from start to finish. A clean desk is a sign of a sick mind, lol. The desk looks great.
Maybe after this one. Not in the mood for an easy kit right now. the Hydrocal and plastic ones are too easy
@@TomsTrainsandThings I didn’t know they were easier kits. I would have thought there was a lot of sanding and stuff to get the corners square and fitted but what do I know? I never did a Hydrocal kit, lol.
Same as with wood kits, you still need to sand the edges to get the flash off
do a small one
Thanks Curtis
I like the wood products kit
Thanks Reggie, keep it small
Do what ever strikes your fancy
Thanks, you're no help lol
Amazing build Tom.
Thanks!
Awesome job on your building ~ looks Fantastic!👍 Love the choice of colours.🙂
Thank you so much 🤗
great vid
Thanks lee
Me likem plenty good.
Good to hear
Good to hear
Good looking work Tom. The details are in the work and these details are fantastic!
Many thanks!
Looks Great man Good Job!
I'm glad you like it
Next up Tom Cigar Alley
That's one of many choices, I have a shelf full of kits to choose from
Incredible build thanks Tom
My pleasure!
Well done. Thanks for the tips.
Glad it was helpful!
Looks great Tom!
Thanks Gary
awesome
Thanks Reggie
I’ve been eying this one. What’s the foot print in HO?
Each building is 1.5" sq
I really like the colours! What a huge project, looks like you are moving right along. Will be waiting for the next update 🙂👍
Thanks so much! 😊Next update tonight on Workbench Wednesday Live at 8 PM est
I'm under the impression that the "sections" of the PM42 correspond to the "zones" of the BDL168.
They can be used together
Great Work.👍👍👍👍
Thank you sir
That is a highly detailed kit and you are making great progress with it. Can't wait to see it finished.
I love this kit
That's a very nice kit, and beautiful progress, can't wait to see it finished 👍
Thanks so much
Looking good Tom! Nice work.
Thanks Steve👍
Great video nice build keep up the great build s thanks lee
Thanks Lee👍
hey Tom thats a great looking kit, the details in doors and windows are really nice. What color blue is this , I like it.
Thanks Jerry. The color is Vintage Teal a Rustoleum rattle can paint
when i retire i will do the same, put this track in my backyard and enjoy watching the little train,thanks for this video
Sounds great! Have fun in your backyard with the trains
@@TomsTrainsandThings inspiring video, thanks again
Hi, are there any places on line to get seprate ho engines and rolling stock as well as track?
There are mant places online: Yankee Dabler Train World Zitnik Trains Star Hobby Just do a google search
I enjoyed the replay. It was great to visit you and see your layout. Those pictures look great.
I enjoyed your visit. Thanks for the visit and commitment
this will come in handy for me since I am wiring signals.
Glad it was helpful
WONDERFUL and nice music that fits railroading -is this layout permanently (let's say Thursday to Sunday) open to the public? thank you
Thank you. It's a perminent layout but only open to the public during train shows and the county Fair. So like 5 times a year
Interesting model house presentation.
Glad you liked it!